E/Z Slide™ Track System kit contain the following:
- Aluminum Tack
- Two truck assemblies
- Two truck mounting brackets
- Two lower guide roll assemblies
- All required bolts, nuts, and back brackets.
Scan the graphic above with a free QR Code Reader App on your smart phone to bookmark our mobile site.
By A Web Design
Slide Gate Description
Upper Track Gate System - E/Z Slide
Check these exclusive features and advantages:
- The E/Z-SLIDE Gate Adapter Kit enables cantilever slide gates to ride on maintenance free roller trucks that are enclosed inside a bolt on aluminum track assembly which protects them from the elements.
- The one piece steel body roller truck assembly with its factory lubricated and sealed roller bearings assures problem free operation of gate.
- The enclosed roller truck has ease of motion and is safer than roller wheel supported gates.
- The track assembly is a heavy extrusion of corrosion free aluminum, specially designed to be easily bolted to a round pipe or square member of the upper gate. This becomes an integral part of the frame.
- The adapter kit is designed for cantilever slide gate to be installed with two 4" posts for each single gate.
- For round member gates the upper frame should be 2-1/2" O.D. steel or aluminum. For square member gates use 2" x 2" steel or aluminum.
- The track is completely pre drilled and can be installed on most existing cantilever slide gates in the field.
